The ConeArt oval electric kiln is for bisquing large loads, large work, or glazing up to cone 6. Do not ever fire any of our electric kilns over cone 6.
This kiln has a different controller, so there is a different method of entering a firing program into the kiln.
Here is how to enter a program with a cone number:
Here’s how to enter your own program (your own ramp schedule) into the kiln:
Here are other useful videos:
Troubleshooting “fail” error
Troubleshooting “Error 1” code
Troubleshooting “Error D” code
How to replace a relay in the ConeArt kiln
How to replace thermocouples in the ConeArt Kiln